OK we have some sewing to do, so lets get straight into it and have some fun :).
I gave you the cutting requirements for today's sewing in yesterdays Homework Assignment but if you didn't have time, then here's a recap:
From your white fabric cut:
- 1 x 1 1/2" x 11" strip
- 1 x 2 1/2" x 7" strip
- 8 x 2 1/2" x 3 1/2" rectangles
- 1 x 2 1/2" x 11" strip
- 1 x 1 1/2" x 7" strip
We are working with the 11" blue and white strips first today.
Step 1: Sew the blue 2 1/2" x 11" strip to one long side of the white 1 1/2" x 11" strip, pressing the seam towards the blue strip to yield one rectangle which should measure 3 1/2" x 11" when complete.
TIP: for a nice crisp seam, set your seam first by pressing with a hot iron and then finger press along the length of the seam, opening it in the direction you want to press, before pressing flat with your iron.
Step 2: Trim and square up one end of the rectangle and then cross cut units at 2 1/2" intervals. You will need to cut 4 of these units and each unit should measure 2 1/2" x 3 1/2".
Next we are working with the 7" blue and white strips.
Step 3: Sew a white 2 1/2" x 7" strip to one long side of the blue 1 1/2" x 7" strip, pressing the seam towards the blue strip to yield one rectangle which should measure 3 1/2" x 7" when complete.
Step 4: Trim and square up one end of the rectangle and then cross cut units at 1 1/2" intervals. You will need to cut 4 of these units and each unit should measure 1 1/2" x 3 1/2".
Step 5: Carefully matching the seams and ensuring you have correct orientation, sew one of these units to the bottom of each of the four units made at Step 2, along the long sides and pressing the seams open to yield four squares which should each should measure 3 1/2" square when complete.
Step 6: Sew a white 2 1/2" x 3 1/2 rectangle to the left hand side of each of the four squares made at Step 5, along the long sides and pressing seams towards the squares. Each unit should measure 3 1/2" x 5 1/2" when complete.
You will need to use the 4 x four patch squares we made on Day 1 for the following step.
Step 7: Sew a white 2 1/2" x 3 1/2 rectangle to the right hand side of each of the 4 four patch squares made on Day 1, along one short side and pressing seams towards the squares. Each unit should measure 3 1/2" x 5 1/2" when complete.
Step 8: Carefully matching the seams and ensuring correct orientation, sew one of these units to the top of each of the four units made at Step 6, along the long sides and pressing the seams open to yield four squares which should each measure 5 1/2" square when complete.
Is it still a mystery so far? If you know what we are sewing, please don't tell me and burst my "I can keep a secret" bubble ;) Let me delude myself just a little longer.
Lastly, here's your "Homework Assignment" due tomorrow:
I will recap them again in tomorrows post if you haven't been able to find the time throughout the day.
That's it for me today, clever peeps.
Cya tomorrow :)
So gorgeous blocks.
ReplyDeleteHi, sweetie! Decided to play along, and have had enjoyed catching up on the last few clues. Looking forward to tomorrow :-) Thanks for the fun! Hugs from me
ReplyDeleteThese are beautiful, and no I don't know what is yet. They look good together though. I am done with this step.
ReplyDeleteHi Rose, I bought two of your fabulous patterns just in the past week. I'm the one who made the barn quilt from your Enigma pattrrn. I've never tried a mystery quilt before but since I love your color choices and designs so much I decided to give it a try. This is so fun!
ReplyDeleteCan't wait to see how this turns out!
Thank you. Suzanne
Hey rose, I am working through this pattern with some of my friends and on this day, day 3 it says I should have 4 square blocks from day one but I don’t have them, we didn’t even sew on day one...I’m very confused!!
ReplyDeleteBarbara if you look at the post 7 Day Mystery Sew Along - Day One, we made four 4 Patch Units from the cut strips. Maybe you didn't scroll to the end of the post. These are the ones you need on Day 3. :)
Delete